Maintenance of Power Quality Analyzer
Power quality refers to the quality of the AC power supplied to the user through the public power grid. Generally speaking, it refers to the quality of the power in the power grid lines. Power quality problems are mainly caused by the terminal load side. For example, the impact reactive load will cause the grid voltage to generate Violent fluctuations reduce the quality of power supply.
When the power quality of the power grid is disturbed or polluted and cannot meet the relevant national standards, it is necessary to improve the power quality of the power grid in a targeted manner. To understand the actual situation of the power quality of the power grid, it is necessary to have the corresponding equipment power quality analyzer ( Also known as three-phase power quality analyzer) to test and analyze it.
Power Quality Analyzer Maintenance:
1. Battery maintenance and charging.
2. The instrument uses high-performance lithium-ion rechargeable battery as the internal power supply. Operators cannot replace other types of batteries at will to avoid damage to the instrument due to incompatible levels.
3. The instrument must be charged in time. Avoid battery deep discharge to affect battery life.
4. Charge as much as possible every day under normal use (it is best to charge it once a month if it is not used for a long time), so as not to affect the use and battery life. Each charging time should be more than 6 hours. Due to the internal charging protection function, the instrument can be continuously charged.
5. Each time the battery is taken out of the instrument, the battery protection board inside the instrument automatically enters the protection state. After reloading the battery, it cannot work directly. It needs to be powered on with a charger to release the protection state before it can work normally.
