RDXZL-800kVA/50kV Power Frequency Series Resonant Test System
- Wrindu
- China
- about 10 days
- 100 set/month
- RDXZF-800kVA 50kV
1. The required power supply capacity is greatly reduced to 1/Q (usually Q≥10) of the traditional power capacity.
2. Smaller in size and lighter in weight with the same capacity.
3. The waveform distortion rate is less than 1%.
4. The applied series resonance is characterized by a steady voltage boost and easy operation.
RDXZL-800kVA/50kV Power Frequency Series Resonant Test System
Product Characteristics
1. The required power capacity is greatly reduced, which is only 1/Q of the test capacity.
2. The weight and size of the device is greatly reduced to 1/10-1/30 of the taditional test device.
3. Obtaining a good sinusoidal waveform by reducing the waveform distortion of output voltage.
4. Efficiently finding the insulation weakness and preventing large short-circuit current from burning the fault point.
5. No recovery overvoltage.
6. Three working modes (automatic mode, manual mode, automatic tuning & manual boost mode) available for users to choose from.
7. Digital data can be stored and printed off-site.
8. Automatical frequency scanning with the result intuitively displayed on the LCD screen.
9.The DSP platform technology is adopted to make the human machine exchange interface more humanized.
Technical Parameters
Rated capacity | 800kVA |
Working power supply | Three-phase 380V, power frequency 50Hz |
Maximum rated AC voltage | 50kV |
Maximum rated AC current | 16A |
Output frequency | 50Hz |
Device output waveform | Sine wave |
Waveform distortion rate | ≤1.0% |
Allowable continuous working time | 5 minutes at one time under rated conditions |
Temperature rise | Temperature rise ≤50K after continuous operation under rated load for 5 min |
Quality factor of this device | Q≥20 (f=50Hz) |
Protection functions | Over-voltage, over-current, flashover and other protection functions |
System measuring accuracy | Effective value of the system is 1.0 |
Noise level | ≤65dB |